中文
Русский
Français
Español
العربية
Deutsch
Nederlands
Português
Italiano
Türkçe
한국어
日本語
ภาษาไทย
Čeština
繁體中文
Indonesian
Tiếng Việt
Magyar
+86-18965153335
Categories
- Cable Coiling & Binding Machine
- Tape Winding Machine
- Semi-Auto Wire Brush Machine
- Wire Cutting & Stripping Machine
- Semi-Auto Crimping Machine
- Wire Stripper Crimper Blades
- Terminal Tensile Tester
- Cut-Off Machine
- Cable Labeling Machine
- Strapping Banding Tool
- Wire Terminals & Connectors
- Automated Tape Dispenser
- Automatic Wire Crimping Machine
- Terminal Crimping Tools
- Automatic Wire Feeder
- Automatic Soldering Machine
- Nylon Cable Tie Machine
- Injection Molding Machine
- Brazing & Welding Machine
- Screw Fastening Machine
- Power Cord Crimping Machine
- Wire Harness Tester
- Glue Dispensing Robot
- Wire Harness Packing Materials
New products
Company news
How to operate Full-automatic Wire Stripping Cutting Machines, Stripping parameter setting: The machine when in standby mode, press; the front length parameter to begin to flicker, at this time can directly enter the number, if the input error, press clear input digital input again; then press preservation, and a parameter flicker, until the front end length, front half stripping, total length, rear half stripping end length, cutter, knife back all the input completion value
LAN CABLE Production Procedure, usb cable manufacturing process, cat 6 cable making machine, how are patch cables made, copper wire manufacturing, patch cord machine,what is the last step in making network cable
1. Process cable—automatic wire cutting and stripping machine & automatic wire feeder machine, 2. Combined the USB connector with the cable.—- Automatic USB wire soldering machine, 3. Connector Injection molding —injection molding machine and some matching machines, 4. USB cable Performance Testing—Electrical performance Testing machine, 5. Packing the USB cable————-Automatic cable winding and bundling machine/Semi-automatic cable winding and bundling machine
HDMI /USB 3.0/USB 3.1 cable manufacturing process and equipment, Process 1: Cut and strip the cable, Process 2: Trim the Aluminum foil, Process 3: Position the inner wire on the plastic wire claw holder, Vertical Aluminum foil trimming machine, Process 4: Strip the inner wire, Process 5: Tin the inner wire, Process 6: Assemble the connector with wire, Process 7: welding the connector, Process 8: mold the connector
power cord cable Manufacturing Process and Equipment, Step1:Cutting and stripping the cable to the length and outer jacket, Step 2: Stripping and twisting the cable inner wire, Step3: crimping the plug to the cable to make the cable head plug. Step 4: Crimping the AC terminal to the cable for making the cable tail plug.
link : 中文 | Русский | Français | Español | English | العربية | Deutsch | 日本語| Nederlands| Português|
×
WeChat: +8618965153335
+86-18965153335