- Cable wire Coiling Binding
- Tape winding machine
- Semi-auto strip twist brush
- Wire cutting stripping machine
- Semi-auto crimping machine
- Stripper crimper Blades
- Terminal Tensile Tester
- Cut-off machine
- Cable labeling machine
- Strapping banding tool
- Terminals/connector/Plugs
- Automated Tape Dispenser
- Automatic Crimp Machine
- Terminal Crimping tools
- Auto Wire feeder
- Automatic soldering machine
- Nylon Cable Tie Machine
- Injection molding machine
- Brazing welding machine
- Screw fastening machine
- Power cord crimping machine
- Wire harness tester
- Glue Dispensing Robot
- Wiring harness Packing materials
Full automatic wire cut strip one end crimping another end stripping
Model No: 501S
Full automatic wire cut strip one end crimping another end stripping tinning 501S
CapacityWire length 50mm, about 3,200 wires/hour (no twisting)
Applicable wire diameterAWG # 32 - AWG#18
Processing length (Central section with jacket remaining) 18mm- 99,990mm (wire clip can be refitted to 8mm)
Stripping length Front 0.1-8.0mm rear 0.1-18.0mm
Cutter depth Maximum adjustment 3.50mm resolution 0.01mm
Cutting toleranceModifiable
Crimping capacity 2 Tons
Detection deviceLow air pressure, existing of electric wire, existing of the terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.
Auxiliary devicePrewire feeding synchronizer, terminal waste paper rewinding device
Power supplysingle phase, AC180V-242V, 50/60Hz, 10A
Compressed air0.5 MPa(5kgf / cm2) clean dry air
Dimension 1,800W × 900D × 1,450H, about 400KG
- Inquiry now
Features
1. cut off the wire, peeling, tin and other related actions will be automatically adjusted with time.
2. the production line can range from AWG18-AWG32, which is very practical.
3. this machine has the function of twisting.
4. ultra short line: middle leaving glue for 18mm
5. the machine's Tin angle is close to 90 degrees so that the diameter of the wire is evenly distributed.
6. the machine adjusts the depth of spots by dispersion control. Make the spot depth more accurate.
7. the machine is suitable for horizontal, straight OTP mold.
|
Model |
WPM-501S |
|
Capacity |
Wire length 50mm, about 3,200 wires/hour (no twisting) |
|
Applicable wire diameter |
AWG # 32 ~ AWG#18 |
|
Processing length |
(Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm) |
|
Stripping length |
Front 0.1~8.0mm rear 0.1~18.0mm |
|
Cutter depth |
Maximum adjustment 3.50mm resolution 0.01mm |
|
Cutting tolerance |
Modifiable |
|
Crimping capacity |
2 Tons |
|
Detection device |
Low air pressure, existing of electric wire, existing of terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire. |
|
Auxiliary device |
Prewire feeding synchronizer, terminal waste paper rewinding device |
|
Power supply |
single phase, AC180V~242V, 50/60Hz, 10A |
|
Compressed air |
0.5 MPa(5kgf / cm2) clean dry air |
|
Dimension |
1,800W × 900D × 1,450H, about 400KG |
- Categories
- Cable wire Coiling Binding
- Tape winding machine
- Semi-auto strip twist brush
- Wire cutting stripping machine
- Semi-auto crimping machine
- Contact Us
sales@cablecutting.net
kevin201166
+86-18965153335
- Copyright @ 2003-2024 XIAMEN JINGWEI TECHNOLOGY CO., LTD.
- E-mail sales@cablecutting.net npsales@126.com
- Contact： Mr. Kevin, Ms. Donna
- Tel：+86-0592-8628902 Mobile:+86-18965153335 Skype: kevin201166 Fax:+86-0592-6065010